��JFIF��2� /proc/thread-self/root/usr/share/snmp/mibs/ Current File: //proc/thread-self/root/usr/share/snmp/mibs/SNMP-USM-HMAC-SHA2-MIB.txt
 SNMP-USM-HMAC-SHA2-MIB DEFINITIONS ::= BEGIN
    IMPORTS
       MODULE-IDENTITY, OBJECT-IDENTITY,
           mib-2 FROM SNMPv2-SMI -- RFC 2578
           snmpAuthProtocols FROM SNMP-FRAMEWORK-MIB; -- RFC 3411

snmpUsmHmacSha2MIB MODULE-IDENTITY
    LAST-UPDATED    "201604180000Z" -- 18 April 2016, midnight
    ORGANIZATION    "SNMPv3 Working Group"
    CONTACT-INFO    "WG email: OPSAWG@ietf.org
                    Subscribe:
                        https://www.ietf.org/mailman/listinfo/opsawg
                    Editor:    Johannes Merkle
                               secunet Security Networks
                    Postal:    Mergenthaler Allee 77
                               D-65760 Eschborn
                               Germany
                    Phone:     +49 20154543091
                    Email:     johannes.merkle@secunet.com

                    Co-Editor: Manfred Lochter
                               Bundesamt fuer Sicherheit in der
                               Informationstechnik (BSI)
                    Postal:    Postfach 200363
                               D-53133 Bonn
                               Germany
                    Phone:     +49 228 9582 5643
                    Email:     manfred.lochter@bsi.bund.de"
    DESCRIPTION
        "Definitions of Object Identities needed for the use of
        HMAC-SHA2 Authentication Protocols by SNMP's User-based Security
        Model.

        Copyright (c) 2016 IETF Trust and the persons identified as
        authors of the code.  All rights reserved.

        Redistribution and use in source and binary forms, with or
        without modification, is permitted pursuant to, and subject
        to the license terms contained in, the Simplified BSD License
        set forth in Section 4.c of the IETF Trust's Legal Provisions

        Relating to IETF Documents
        (http://trustee.ietf.org/license-info)."

    REVISION "201604180000Z" -- 18 April 2016, midnight
    DESCRIPTION
        "Version correcting the MODULE-IDENTITY value,
        published as RFC 7860"

    REVISION "201510140000Z" -- 14 October 2015, midnight
    DESCRIPTION
        "Initial version, published as RFC 7630"
    ::= { mib-2 235 }

usmHMAC128SHA224AuthProtocol OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION "The Authentication Protocol
                usmHMAC128SHA224AuthProtocol uses HMAC-SHA-224 and
                truncates output to 128 bits."
    REFERENCE   "- Krawczyk, H., Bellare, M., and R. Canetti,
                HMAC: Keyed-Hashing for Message Authentication,
                RFC 2104.
                - National Institute of Standards and Technology,
                Secure Hash Standard (SHS), FIPS PUB 180-4, 2012."
    ::= { snmpAuthProtocols 4 }

usmHMAC192SHA256AuthProtocol OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION "The Authentication Protocol
                usmHMAC192SHA256AuthProtocol uses HMAC-SHA-256 and
                truncates output to 192 bits."
    REFERENCE   "- Krawczyk, H., Bellare, M., and R. Canetti,
                HMAC: Keyed-Hashing for Message Authentication,
                RFC 2104.
                - National Institute of Standards and Technology,
                Secure Hash Standard (SHS), FIPS PUB 180-4, 2012."
    ::= { snmpAuthProtocols 5 }

usmHMAC256SHA384AuthProtocol OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION "The Authentication Protocol
                usmHMAC256SHA384AuthProtocol uses HMAC-SHA-384 and
                truncates output to 256 bits."
    REFERENCE   "- Krawczyk, H., Bellare, M., and R. Canetti,
                HMAC: Keyed-Hashing for Message Authentication,
                RFC 2104.
                - National Institute of Standards and Technology,
                Secure Hash Standard (SHS), FIPS PUB 180-4, 2012."
    ::= { snmpAuthProtocols 6 }

usmHMAC384SHA512AuthProtocol OBJECT-IDENTITY
    STATUS      current
    DESCRIPTION "The Authentication Protocol
                usmHMAC384SHA512AuthProtocol uses HMAC-SHA-512 and
                truncates output to 384 bits."
    REFERENCE   "- Krawczyk, H., Bellare, M., and R. Canetti,
                HMAC: Keyed-Hashing for Message Authentication,
                RFC 2104.
                - National Institute of Standards and Technology,
                Secure Hash Standard (SHS), FIPS PUB 180-4, 2012."
    ::= { snmpAuthProtocols 7 }

END